Wib100_vPA-S
Crédit photo: .Kartesian company
Wib100_vPA-S is a professional 4 inch wideband engineered for compact and powerful systems.
It is built with 38.5mm diameter voice coil to ensure reliability during long period and high input power.
The advanced motor structure uses 2x NdFeB magnets (grade N40H), a cooper ring and optimized pole pieces to keep very low THD.
The membrane is built with specific long fibers pressed paper and Aluminum dust cap.
We suggest to use LRC notch filter (as described here after) to get more linear response in high frequency.
T&S parameters
Fs : 94Hz
SPL : 89.5dB /2,8V /1m
Re : 5.6Ω
Qms : 3.45%
Qts : 0,274%
Bl : 9N/A
VAS : 1.41L
Mms : 7.3g
Sd : 50.3cm²
Frequency responses
On IEC baffle
Pink noise
Distance: 1m
Signal input: 2,83V
Curve below 150Hz is simulated in 1.2L vented enclosure, Fc = 90Hz
Dash curves: 30° & 60°
Smoothing: 1/24 Octave
Impedance measured in free air
Mechanical drawing
Unit: [mm]
Advanced design
Long fiber paper cone
"M" damped fabric surround
Conical aluminum dust cap
Ø38.5mm, CCA Wire
Glass fiber former
Dual NdFeB magnets (N40H graded)
Demodulated by cooper ring
Stamped steel frame with vented spider
.png)
Advanced measurements
