Sub120_vHP

Crédit photo: .Kartesian company

Sub120_vHP is a unique combination of a subwoofer and a mid-band.

 

Thanks to its 120mm diameter, the Aluminum - Carbone fiber cone works perfectly until 2500Hz. The suspension and the motor structure has been designed to ensure long excursion with minimum distortion.

 

As a result, in association with our 28mm soft dome tweeter, it is possible to built a very compact 2 ways system (5 -6L) reproducing 45Hz to 3000Hz (-3dB).

Fs : 46Hz

SPL : 82dB /2,8V /1m

Re : 6.8Ω

Qms : 2.52%

Qts : 0.332%

Bl : 8.6N/A

VAS : 3.38L

Mms : 14.48g

Sd : 53.5cm²

T&S parameters

Frequency responses

On IEC baffle

Pink noise

Distance: 1m

Signal input: 2,83V

Dash curves: 30° & 60°

Smoothing: 1/12 Octave

Curve below 100Hz is simulated:

5L vented enclosure

Fc: 48Hz

Impedance measured in free air

Sub120_vHP_Official response.PNG

Mechanical drawing

Unit: mm

Advanced design

Surround Kompliance.png
Dynamik Spider.png
Kombo magnets.png

Aluminum cone

Large NBR surround

Carbon fiber dust cap

Ø33mm Cu voice coil (2 layers)

Optimized pole pieces

Inductance non-linearity device

Innovative .dynamiK spider

Aluminum frame with vented spider

2 High-grade Fe magnets

11600 Gauss on 6mm height

Crédit photo: .Kartesian company
Sub120_vHp-F Drawing.PNG

Advanced measurements

Logo KLIPPEL RGB_transparent.png
Note: We improve continually our product. No contractual data.