Cox120_vHP
Crédit photo: .Kartesian company
Advanced coaxial , designed to cover 60 - 22 000Hz (-3dB).
The cone of the woofer uses the hexaKone technology and the reversed NBR surround avoids any diffraction for tweeter sound wave.
The tweeter is built with very light 12mm voice coil dived in twin NdFeB magnets motor, delivering 16000 Gauss.
We suggest a crossover point around 3800Hz, 12dB/Oct.
T&S parameters
(woofer)
Fs : 68Hz
SPL : 88dB /2,8V /1m
Re : 5.3Ω
Qms : 4.2%
Qts : 0.339%
Bl : 5.92N/A
VAS : 3.11L
Mms : 5.7g
Sd : 47.8cm²
Frequency responses
On IEC baffle
Pink noise
Distance: 1m
Signal input: 2,83V
On speaker axe
Dash curves: 40°
Low frequency simulated:
4.5L vented enclosure
Tuning frequency: 60Hz
Blue: Woofer
Yellow: Tweeter
Smoothing: 1/12 Octave
Impedance measured in free air
Mechanical drawing
Unit: [mm]
Crédit photo: .Kartesian company
Advanced design
Woofer:
hexaKone
NBR surround
Ø26mm Cu voice coil
Aluminum former
Demodulated by cooper ring
Optimized pole pieces
Innovative DynamiK spider profile
Aluminum frame with vented spider
10900 Gauss on 5mm height
Tweeter
Damped silk dome
Ø12mm CCAW voice coil
Vented Polyimide former
Innovative Koupled chambers
Dual magnets motor structure
High grade NdFeB magnets
16000 Gauss on 1.2mm height
PA12 with dual rear chambers system
.png)
Advanced measurements
Woofer part of Cox120_vHP is same as Wom120_vMS.
This is wwhy Wom120_vMS is mentioned on the non-linearity graphics.