Cox120_vHP

Crédit photo: .Kartesian company

Advanced coaxial , designed to cover 60 - 22 000Hz (-3dB).

The cone of the woofer uses the hexaKone technology and the reversed NBR surround avoids any diffraction for tweeter sound wave.

 

The tweeter is built with very light 12mm voice coil dived in twin NdFeB magnets motor, delivering 16000 Gauss.

We suggest a crossover point around 3800Hz, 12dB/Oct.

T&S parameters

(woofer)

Fs : 68Hz

SPL : 88dB /2,8V /1m

Re : 5.3Ω

Qms : 4.2%

Qts : 0.339%

Bl : 5.92N/A

VAS : 3.11L

Mms : 5.7g

Sd : 47.8cm²

Frequency responses

On IEC baffle

Pink noise

Distance: 1m

Signal input: 2,83V

On speaker axe

Dash curves: 40°

 

Low frequency simulated:

4.5L vented enclosure

Tuning frequency: 60Hz

Blue: Woofer

Yellow: Tweeter

Smoothing: 1/12 Octave

 

Impedance measured in free air

Rep Fr + Z.PNG

Mechanical drawing

Unit: [mm]

Crédit photo: .Kartesian company

Advanced design

Woofer:

hexaKone

NBR surround

Ø26mm Cu voice coil

Aluminum former

Demodulated by cooper ring

Optimized pole pieces

Innovative DynamiK spider profile

Aluminum frame with vented spider

10900 Gauss on 5mm height

Tweeter

Damped silk dome

Ø12mm CCAW voice coil

Vented Polyimide former

Innovative Koupled chambers

Dual magnets motor structure

High grade NdFeB magnets

16000 Gauss on 1.2mm height

PA12 with dual rear chambers system

Cox120_vHP_Drawing.PNG
Surround Kompliance.png
Dynamik Spider.png
HexaKone.png
Konstant Le(X).png
Koupled chambers.png

Advanced measurements

Woofer  part of Cox120_vHP is  same as Wom120_vMS.

This is wwhy Wom120_vMS is mentioned on the non-linearity graphics.

Logo KLIPPEL RGB_transparent.png
Note: We improve continually our products. No contractual data.