top of page

Wom165_vHE

Crédit photo: .Kartesian company

Wom165_vHE is the uncompromised 6.5' woofer to reproduce 35Hz - 2500Hz in High End products.

Its uses under-hung voice coil, built on Ø36mm Titanium former, and made of only 2 layers.
 

Thanks to the advanced and powerful motor structure, it ally strong force factor (6.8N/A) and negligible induc-tance modulation. The impedance curve shows the very low inductance value (Le = 0.085mH) which help to design efficient passive crossover.

 

The association of Kartesian innovation about the membrane, the spider, the pole pieces and the voice coil allow to reach very low THD (0.3% from 100Hz to 1000Hz with 90dB at 1m).

T&S parameters

Fs : 36Hz

SPL : 89dB /2,8V /1m

Re : 6Ω

Qms : 6.2%

Qts : 0.365%

Bl : 6.8N/A

VAS : 31.8L

Mms : 13.2g

Sd : 123cm²

Frequency responses

On IEC baffle

Pink noise

Distance: 1m

Signal input: 2,83V

Curve below 110Hz is simulated in  vented enclosure,35L.

Tuning frequency= 36Hz

 

Dash curves: 30° & 60°

Smoothing: 1/12 Octave

Impedance measured in free air

Wom165_vHE_Official response + Z.PNG

Mechanical drawing

Unit: [mm]

Wom165_vHE _Drawing.PNG
Crédit photo: .Kartesian company

Advanced design

Kompund CGF.png
Dynamik Spider.png
Konstant BI(X).png
Kombo magnets.png
Konstant Le(X).png

Unique Glass fiber / Carbon fiber membrane & dust cap

High compliance NBR surround

Under-hung voice coil (36mm)

2 layers voice coil

Titanium former

Demodulated by Cooper ring

LCS pole pieces

Optimized vented T-Yoke

Innovative .dynamiK spider

Fully opened Aluminum frame

Advanced measurements

Logo KLIPPEL RGB_transparent.png
Note: We improve continually our products. No contractual data.
bottom of page