top of page


Crédit photo: .Kartesian company

Wom200_vPA-S is dedicated to professional high quality studio monitor, or demanding HiFi systems.

It allies good sensitivity and bass extension with very low THD.
To be used in 2 ways systems from ~45Hz to 1500Hz, or ideally in 3 ways systems from ~45Hz to 450Hz.
The motor structure has been engineered with FEA to keep linear Bl(x) and Le(x) over +/-6mm.


The suspension is made of low mechanical loss NBR.
The cone is built with paper and large concave dust cap to get low mass and high rigidity.

Crédit photo: .Kartesian company

T&S parameters

Fs : 53Hz

SPL : 92dB /2,8V /1m

Re : 5.5Ω

Qms : 7.8%

Qts : 0.352%

Bl : 11.8N/A

VAS : 20.9L

Mms : 28g

Sd : 214cm²

Frequency responses

On IEC baffle

Pink noise

Distance: 1m

Signal input: 2,83V

Dash curves: 30° & 60°

Curve below 125Hz simulated in vented enclosure, 25L.

Tuning frequency= 48Hz


Smoothing: 1/12 Octave

Impedance measured in free air

Wom200_vPA-S_Official Response +Z - Copie.PNG

Mechanical drawing

Unit: [mm]

Crédit photo: .Kartesian company

Advanced design

Konstant Le(X).png
Surround Kompliance.png

Treated paper cone

Concave pressed paper dust cap

Low lost NBR surround

Poly-cotton spider

Ø50mm, Cooper C lad Aluminum Wire
Glass fiber former


High grade Fe magnet structure

Demodulated by cooper ring

11600 Gauss on 8 mm height

Optimized and vented pole pieces


Vented aluminum frame

Advanced measurements

Logo KLIPPEL RGB_transparent.png
Note: We improve continually our products. No contractual data.
bottom of page