top of page


Crédit photo: .Kartesian company

Sub120_vHE is the top of the art loudspeaker for low frequency reproduction in compact high-end HiFi.


It integrates several innovation such as the dynamiK spider which keep constant Fs[Hz] over the full excursion, and the advanced motor structure, providing very linear force factor Bl(X) and inductance Le(X].


The motor structure is built with dual high grade Neodymium magnets, and dual Aluminum rings to avoid inductance modulation and offer very low distortion performances.


The membrane is made of Aluminum cone and proprietary CGF dust cap, which extend the frequency response over 3500Hz to built 2 ways systems.

T&S parameters

Fs : 46Hz

SPL : 81.5dB /2,8V /1m

Re : 6.6Ω

Qms : 5.4%

Qts : 0,416%

Bl : 7.3N/A

VAS : 3.93L

Mms : 12.6g

Sd : 54cm²

Frequency responses

On IEC baffle

Pink noise

Distance: 1m

Signal input: 2,83V

Dash curves: 30° & 60°

No smoothing

Curve below 100Hz is simulated:

5L vented enclosure

Tuning frequency: 45Hz

Impedance measured in free air

Sub120_vHE_Official response + Z.PNG
Drawing Sub120_vHE_edited.jpg

Mechanical drawing

Unit: [mm]

Aluminum cone

Large NBR surround

Carbon fiber dust cap

33mm Cu voice coil (2 layers)

Vented Polyimide former

Optimized pole pieces

Inductance non-linearity device

Demodulated by 2 Al rings

Innovative t.dynamiK spider

Aluminum frame with vented spider

Advanced design

Dynamik Spider.png
Konstant Le(X).png
Kombo magnets.png
Crédit photo: .Kartesian company
Kompund CGF.png
Crédit photo: .Kartesian company

Advanced measurements

Logo KLIPPEL RGB_transparent.png
Note: We improve continually our products. No contractual data.
bottom of page