top of page


Crédit photo: .Kartesian company

Lom165_vPA-H is a professional Mid-woofer designed to reproduce 60 - 2000Hz (-3dB) with high dynamic range and very low distortion.

Suspensions use dynamiK spider and low lost Kompliance surround to reduce significantly the non-linearity.


The motor structure, engineered with FEA, is built with Neodymium and ferrite magnets to produce intense and focus magnetic field.

T&S parameters

Fs : 52Hz

SPL : 92dB /2,8V /1m

Re : 7Ω

Qms : 12.2%

Qts : 0.261%

Bl : 9.8N/A

VAS : 17.37L

Mms : 11.2g

Sd : 121cm²

Frequency responses

On IEC baffle

Pink noise

Distance: 1m

Signal input: 2,83V

Curve below 100Hz is simulated in 10L vented enclosure

Tuning frequency = 60Hz


Dash curves: 30° & 60°

Smoothing: 1/12 Octave

Impedance measured in free air

Rep Fr + Z.PNG

Mechanical drawing

Unit: [mm]

Lom165_vPA-H _Drawing.png

Carbon fiber cone

Concave Carbone fiber dust cap

High compliance NBR surround

36mm Cu voice coil

Polyimide former

Demodulated by Al & Cu rings

Advanced linear inductance device

Innovative DynamiK spider profile

Optimized and vented pole pieces

Hybrid magnets structure (NdFeB + Fe)

Fully vented Aluminum frame

15500 Gauss on 5.5 mm height

Advanced design

Crédit photo: .Kartesian company
Kombo magnets.png
Konstant Le(X).png
Dynamik Spider.png
Surround Kompliance.png

Advanced measurements

Logo KLIPPEL RGB_transparent.png
Note: We improve continually our products. No contractual data.
bottom of page