Lom135_vPA-S
Crédit photo: .Kartesian company
Lom135_vPA-S is a high quality low-midrange for demanding compact professional application.
It provides very dynamic and accurate sounding from 150Hz to 2500Hz.
The motor structure is based on large ferrite magnet (Ø110mm).
It uses advanced pole pieces geometry and cooper ring to keep very low THD on useful bandwidth.
The membrane is made of pressed paper and carbon fiber dust cap to provide more linear frequency response.
T&S parameters
Fs : 115Hz
SPL : 90.5dB /2,8V /1m
Re : 6.3Ω
Qms : 3.15%
Qts : 0.542%
Bl : 8.46N/A
VAS : 2.4L
Mms : 10.3g
Sd : 95.4cm²
Frequency responses
On IEC baffle
Pink noise
Distance: 1m
Signal input: 2,83V
Curve below 120Hz is simulated in 3L sealed enclosure, Fc = 160Hz
Dash curves: 30° & 60°
Smoothing: 1/12 Octave
Impedance measured in free air
Mechanical drawing
Unit: [mm]
Crédit photo: .Kartesian company
Advanced design
Paper cone with concave carbon fiber dust cap
"M" damped fabric surround
Ø38.5mm, CCA Wire
Glass fiber former
Demodulated by cooper ring
High grade Fe magnet
Optimized air cooling
Aluminum frame with vented spider
Advanced measurements
