top of page


Crédit photo: .Kartesian company

Sub185_vKi is  the top of the art subwoofer.


Thanks to its linear excursion of +/-15mm, its low inductance value and light moving mass, Sub185_vKi provides very accurate low frequency reproduction.

Bass are deep, powerful but always nuanced, preserving the dynamic range of the audio signal.

Sub185_vKi has been engineered to be used in the ost demanding High-End systems

T&S parameters

Fs : 28Hz

SPL : 88dB /2,83V /1m

Re : 5.2Ω

Qms : 6.8%

Qts : 0.316%

Bl : 10.1N/A

VAS : 39.7L

Mms : 37g

Sd : 179cm²

Frequency responses

On IEC baffle

Pink noise

Distance: 1m

Signal input: 2,83V

Curve below 100Hz is simulated in  35L vented enclosure,.

Tuning frequency= 30Hz


Dash curves: 30° & 60°

Smoothing: 1/12 Octave

Impedance measured in free air

Official Rep Fr + Z_Sub185_vKi.png
Sub185_vKi_Official drawing.png

Mechanical drawing

Unit: [mm]

Crédit photo: .Kartesian company

Advanced design

Kompund CGF.png
Konstant BI(X).png
Dynamik Spider.png
Konstant Le(X).png
Kombo magnets.png
Surround Kompliance.png
radial magnets.PNG

hexaKone membrane

CGF dust cap

High compliance NBR surround

Large roll surround profile

Under-hung voice coil (78mm)

1 layer CCA wire voice coil

Titanium former

8 high grade NdFeB magnets

8 demodulation cooper spacers

+ 2 Aluminum rings

LCS pole pieces

Optimized vented pole pieces

Dual spiders

Innovative .dynamiK spider

Fully opened Aluminum frame

Advanced measurements

Logo KLIPPEL RGB_transparent.png
Note: We improve continually our products. No contractual data.
bottom of page