. Woofer
Wom165_vMS
Crédit photo: .Kartesian company
Wom165_vMS provides accurate bass response in compact vented enclosure and extended frequency response.
The suspension uses the .dynamiK technology to keep excursion control in any situation.
The motor structure, engineered with FEA, uses cooper ring for very low THD.
The cone is made with our proprietary CGF material, 10 times more rigid than usual carbon fiber.
T&S parameters
Fs : 39Hz
SPL : 90dB /2,8V /1m
Re : 6.2Ω
Qms : 2.8%
Qts : 0.257%
Bl : 8.92N/A
VAS : 24.82L
Mms : 14.8g
Sd : 124.7cm²
Frequency responses
On IEC baffle
Distance: 1m
Signal input: 2,83V
Low frequency simulated in vented enclosure, 17L.
Tuning frequency= 45Hz
Dash curves: 30° & 60°
Smoothing: 1/12 Octave
Impedance measured in free air
Mechanical drawing
Unit: [mm]
Crédit photo: .Kartesian company
Advanced design
Unique Glass fiber / Carbon fiber membrane & dust cap
High compliance NBR surround
Ribbon wire voice coil (36mm)
Polyimide voice coil former
Demodulated by Cu and Al rings
LCS pole pieces
Optimized vented T-Yoke
Innovative .dynamiK spider
Fully opened Aluminum frame
12500 Gauss on 5mm height
.png)
To be noted
Crédit photo: .Kartesian company
Application example
Loudspeakers used:
Non-compromised professional monitor, able to reproduce every single details on its full bandwidth.
The dynamic range is impressive besides the size of the speaker.
It covers 40 - 25000Hz (-3dB) with a THD lower than 0.5% when the sound pressure is 90dB at 1m.
Contact us for more information
More details coming soon