Wom165_vHE
Crédit photo: .Kartesian company
Wom165_vHE is the uncompromised 6.5' woofer to reproduce 35Hz - 2500Hz in High End products.
Its uses under-hung voice coil, built on Ø36mm Titanium former, and made of only 2 layers.
Thanks to the advanced and powerful motor structure, it ally strong force factor (6.8N/A) and negligible induc-tance modulation. The impedance curve shows the very low inductance value (Le = 0.085mH) which help to design efficient passive crossover.
The association of Kartesian innovation about the membrane, the spider, the pole pieces and the voice coil allow to reach very low THD (0.3% from 100Hz to 1000Hz with 90dB at 1m).
T&S parameters
Fs : 36Hz
SPL : 89dB /2,8V /1m
Re : 6Ω
Qms : 6.2%
Qts : 0.365%
Bl : 6.8N/A
VAS : 31.8L
Mms : 13.2g
Sd : 123cm²
Frequency responses
On IEC baffle
Pink noise
Distance: 1m
Signal input: 2,83V
Curve below 110Hz is simulated in vented enclosure,35L.
Tuning frequency= 36Hz
Dash curves: 30° & 60°
Smoothing: 1/12 Octave
Impedance measured in free air
Mechanical drawing
Unit: [mm]
Crédit photo: .Kartesian company
Advanced design
.png)
.png)
Unique Glass fiber / Carbon fiber membrane & dust cap
High compliance NBR surround
Under-hung voice coil (Ø36mm)
2 layers voice coil
Titanium former
Dual high grade NdFeB magnets
Demodulated by Cooper ring
Under-hung vented voice coil
Optimized and pole pieces design
Innovative .dynamiK spider
Fully opened Aluminum frame
Advanced measurements
