. Compression drivers
Cmp25_vHP
Crédit photo: .Kartesian company
High quality 1inch compression driver with treated Aluminum dome and low compression rate on the phase plug.
It works with front dome radiation and back cover is designed to cool the voice coil through the motor structure.
It reproduces 3000Hz to 25000Hz with extreme linearity (+/-1.5dB), and 102dB sensitivity.
T&S parameters
Fs : 1850Hz
SPL : 102dB /2,8V /1m
Re : 3.6Ω
Qms : -
Qts : -
Bl : 3.18N/A
VAS : -
Mms : 0.21g
Sd : 4.92cm²
Frequency responses
On IEC baffle
Distance: 1m
Signal input: 2,83V
Dash curves: 20° & 40°
Smoothing: 1/24 Octave
High pass filter at 1000Hz (48dB/Oct)
Impedance measured with dedicated round horn
Mechanical drawing
Unit: [mm]
Version with output screw:
Cmp25_vHP-S
Standard version:
Cmp25_vHP-RH
Version with square horn: Cmp25_vHP-H
Advanced design
Treated aluminum dome
Suspension integrated on the dome
KSV former
1inch CCAW voice coil
Aluminum back chamber with cooling
Dome front radiation
Low compression rate
Optimized pole pieces
High grade NdFeB magnet (N48H)
14600 Gauss on 2.2mm height
Available with horn or 33mm screw output
Injected aluminium back plate
Exponential round horn
Horn made in PA12 material
Crédit photo: .Kartesian company
To be noted
Our Cmp25_vHP is a very dynamik compression driver with very low distortion rate from 2800Hz.
This measurement shows its frequency response when it is used with the horn, 1W signal input.
The THD stay lower than -40dB on the useful band, and it is mainly made of 2nd order, which keep natural and warm sounding.
For good power handling and low distortion, we suggest to use our Cmp25_vHP from 3000Hz with a high-pass filter, 2nd order.
Application example
Crédit photo: .Kartesian company
Innovative and compact line array system, using two 4" mid-woofers and a 1" compression driver.
It can also be used as satellite speaker in cinema.
It provides clear and detailed sounding from 100Hz to 22000Hz (-3dB).
94dB/2.8V/1m sensitivity,200W power handling.
Contact us for more information.
.Korpus_4
Loudspeakers used: