. Wide Band

Wib90_vHP

Crédit photo: .Kartesian company

It combines the best of traditional and newest technology to provide wide response and natural sounding.

 

Suitable for multimedia products with demanding acoustic performances.

 

Recommended frequency band :

70 - 20000Hz.

T&S parameters

Fs | 76Hz

SPL | 84.5dB /2,8V /1m

Re | 6.3Ω

Qms | 2.2%

Qts | 0,53%

Bl | 4N/A

VAS | 2.18L

Mms | 3.72g

Sd | 36cm²

Frequency responses

On IEC baffle

Distance: 1m

Signal input: 2,83V

High pass filter at 60Hz (48dB/Oct)

Dash curves: 30° & 60°

No smoothing

Impedance measured in free air

Mechanical drawing

Unit: mm]

Paper cone & NBR surround

Treated paper dust cap

20mm CCAW voice coil

Vented Aluminum former

Optimized pole pieces

Demodulated by cooper ring

Exclusive frame with vented spider

Advanced design

Crédit photo: .Kartesian company

To be noted

We suggest to use this wide-band speaker with a passive radiator in compact enclosure of 4L.

The tuning frequency is 65Hz, which provides 58Hz at -3dB.

For the upper band, we suggest to apply a cut-band filter centered at 3600Hz, with a very low Q.

It can be done with passive crossover as shown on this frequency response.

Grey curve: Raw response

Orange curve: With cut-band

 

In the speaker axe, 2,8V, 1m

Note: We improve continually our products, as a consequence, so technical information shouldn't be updated. Non contractual data.