. Compression drivers
Cmp35_vPA
Crédit photo: .Kartesian company
1inch compression driver designed for demanding design, where sound quality is more important than sensitivity.
We have designed Cmp35_vPA to provide very low distortion, and natural sounding.
Cooper ring and Aluminum ring for very low THD
It reproduces 1500Hz to 20000Hz with extreme linearity (+/-1.5dB), and 103dB sensitivity.
T&S parameters
Fs : 1010Hz
SPL : 103dB /2,8V /1m
Re : 6.6Ω
Qms : -
Qts : -
Bl : 5.22N/A
VAS : -
Mms : 0.38g
Sd : 9.16cm²
Frequency responses
On IEC baffle
Distance: 1m
Signal input: 2,83V
Smoothing: 1/24 Octave
High-pass filter at 600Hz (48dB/Oct)
Measured with exponential horn with Fc = 500Hz
Impedance measured without horn

Mechanical drawing
Unit: [mm]
Crédit photo: .Kartesian company
Advanced design
.png)

Treated Pe-Mg diaphragm
Suspension integrated on the diaphragm
Polyimide former
35mm CCAW ribbon voice coil
Polyimide former
Damped aluminum back chamber
Low compression rate
Optimized pole pieces
Demodulated by Cu and Al rings
13000 Gauss on 3mm height
Ferrite magnet (Y40 grade)
Injected aluminium back chamber
Performances
Measured with exponential horn
450mm output diameter
Crédit photo: .Kartesian company
Application example
Loudspeakers used:
High performances line array system, using two 6" mid-woofers and a 1" compression driver.
.Koprpus_6 has be designed to deliver the best sound quality, with very low THD and free from sound coloration.
It can also be used as satellite speaker in cinema.
To be used from 70Hz to 22000Hz (-3dB).
98dB/2.8V/1m sensitivity,
350W power handling (700W music program).