top of page


Crédit photo: .Kartesian company

1inch output compression driver using innovative magnesium anodized diaphragm and advanced motor.

It gathers the dynamic range of the best compression drivers and the detailed upper band of good tweeter dome.
Recommended from 1500Hz to 20000Hz.

T&S parameters

Fs : 1010Hz

SPL : 103dB /2,8V /1m

Re : 6.6Ω

Qms : -

Qts : -

Bl : 5.22N/A

VAS : -

Mms : 0.38g

Sd : 9.16cm²

Frequency responses

On IEC baffle

Pink noise

Distance: 1m

Signal input: 2,83V

Smoothing: 1/24 Octave

High-pass filter at 600Hz (48dB/Oct)

Measured with exponential horn with Fc = 500Hz

Impedance measured without horn

Official Rep Fr +Z.png

Mechanical drawing

Unit: [mm]

Crédit photo: .Kartesian company

Advanced design

Treated Pe-Mg diaphragm

Suspension integrated on the diaphragm

Polyimide former

Ø35mm CCAW  ribbon voice coil

Polyimide former

Injected aluminum back chamber

Low compression rate

Optimized pole pieces

Demodulated by Cu and Al rings

13000 Gauss on 3mm height

Ferrite magnet (Y40 grade)

Injected aluminium back chamber

Konstant Le(X).png
Konstant BI(X).png

Advanced measurements

Measured with exponential horn

450mm output diameter

Logo KLIPPEL RGB_transparent.png
Note: We improve continually our products. No contractual data.
bottom of page